Cisco CSS11501S-C-K9 Configuration Manual page 208

Command Listing
Table C-3
Command
show telnet, page 62
show terminal, page 62
show timezone, page 62
show version, page 63
show web-management,
page 63
terminal baud, page 63
terminal history, page 64
terminal length, page 65
terminal pager, page 65
terminal reset, page 66
terminal width, page 66
traceroute, page 67
Table C-4
Command
clear interface statistics,
page 68
clear ip routes, page 68
clear line, page 69
clear log, page 69
clear messages, page 70
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-14
Non-Privileged Command Description (continued)
Description
Displays telnet management information for the
device.
Displays terminal setting information.
Displays timezone information for the device.
Displays configuration manager version
information.
Displays Web-based GUI management information
for the device.
Sets the baud for communicating with the Secure
Content Accelerator.
Sets the number of commands saved in the history
buffer.
Sets the number of lines in a terminal window
Enables the terminal pager.
Resets the internal state of the terminal.
Sets the width of the terminal window.
Displays the router information to the specified
destination.
Privileged Command Description
Description
Resets all interface statistics for the device.
Clears the IP routing table on the device.
Closes a specified management session.
Clears diagnostics message buffer.
Empties the diagnostic message buffer on the
device.
Appendix C Command Summary
78-13124-06