Table of Contents
Advertisement
Configuration Command Set
cert
Syntax Description
Usage Guidelines
Examples
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-114
Creates and/or configures the specified certificate object and enters Certificate
configuration mode for that object.
cert <certname> [create]
no cert <certname>
certname
create
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to remove the specified certificate object.
You cannot remove a certificate referenced by a server. A device can have up to
511 (SCA) or 4095 (SCA2) certificate objects. Certificate names can consist of
Arabic numerals and upper- and lowercase alphabetic, underscore (_), hyphen (-),
and period (.) characters. Certificate names must begin with an alphabetic
character or underscore and have a limit of 127 characters.
The following example creates a certificate object named myCert and enters
Certificate Configuration mode for the certificate object myCert.
cert myCert create
show ssl cert (Non-Privileged Command Set)
See the section "Certificate Configuration Command Set".
The name of the certificate object.
Creates a new certificate object named certname and
enters Certificate Configuration mode for that object.
Appendix C
Command Summary
78-13124-06
Advertisement
Table of Contents
Troubleshooting
