Certgroup Chain - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set
Related Commands

certgroup chain

Syntax Description
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-166
Only one certificate is allowed per server. If you enter this command with a
different certificate, that reference replaces the earlier one.
certificate (SSL Configuration Command Set)
show ssl cert (Non-Privileged Command Set)
See also "Certificate Configuration Command Set".
Enables the specified certificate group to be used as a certificate chain.
certgroup chain certgroupname
no certgroup chain
certgroupname
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to remove a certificate group association. When
using the no flag, you need not specify any certificate group name. Only one
certificate chain is allowed.
certgroup (SSL Configuration Command Set)
show ssl certgroup (Non-Privileged Command Set)
See also "Certificate Group Configuration Command Set".
The name of the certificate group.
Appendix C Command Summary
78-13124-06