Registration-Code; Rip - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set
Related Commands

registration-code

Syntax Description
Usage Guidelines

rip

Syntax Description
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-94
Note When a hostname is used rather than an IP address, the hostname is
resolved as an IP address when written to the configuration.
show date (Non-Privileged Command Set)
show rdate-server (Non-Privileged Command Set)
Stores the registration code of the device.
registration-code <code>
code
Availability: Serial, Telnet; FIPS Mode (serial only)
Enables Routing Interface Protocol (RIP) for the current device.
rip [v1|v2]
no rip [v1|v2]
v1
v2
Availability: Serial, Telnet; FIPS Mode (serial only)
The registration code of the device; this code must be
entered within quotation marks ("").
Specifies RIP v1.
Specifies RIP v2.
Appendix C Command Summary
78-13124-06