Figure 5-33 Add Http Headers Example; Figure 5-34 Add Keepalives Example - Cisco CSS11501S-C-K9 Configuration Manual

SSL Configuration Examples
27.

Figure 5-33 Add HTTP Headers Example

28.

Figure 5-34 Add Keepalives Example

29.
The same procedures are used to create and edit backend servers and
reverse-proxy servers. Options presented in the window change, depending upon
the type of server being configured.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
5-34
Make desired changes to the Add HTTP Headers to backend HTTP Stream
panel. This area is shown in Figure 5-33.
You can enable and configure keepalive "GET" messages between the virtual
servers on the device and hardware servers to which they refer. If no response
is received from the hardware server after set amount of time (maxfailure),
the virtual server is marked as "suspended". This information is configured in
the Backend Server Keep-Alive panel as shown in Figure 5-34
Click OK to create the secure server on the Secure Content Accelerator.
Chapter 5 Graphical User Interface Reference
78-13124-06