Telnet; Configuring The Device - Cisco CSS11501S-C-K9 Configuration Manual

Configuring the Device

Note

Telnet

Configuring the Device
Cisco 11000 Series Secure Content Accelerator Configuration Guide
4-6
When prompted to supply a file name during serial management, you
must supply it as a URL in the form of HOST/PATH/FILENAME
using the http://, https://, ftp://, or tftp:// prefix.
After you have assigned an IP address to the Cisco Secure Content Accelerator
using the serial console CLI, you can connect to the appliance via telnet.
Initiate a telnet session with the IP address previously assigned to the
1.
appliance.
2. An SCA> prompt is displayed.
Note When prompted to supply a file name during a telnet
management session, you must supply it as a URL in the
form of HOST/PATH/FILENAME using the http://, https://,
ftp://, or tftp:// prefix.
When you configure an appliance to perform SSL offloading you are actually
setting up one or more logical secure servers whose SSL-related configurations
reside in the appliance. Each logical secure server has several attributes:
• A unique IP address for the real server providing content
Specifications for the appropriate key and certificate to use
•
A security policy specifying the cryptographic scheme(s) to use
•
Chapter 4 Using the Configuration Manager
78-13124-06