Appendix D
MiniMax Command Summary
Resetting the Environment to Factory Defaults
78-13124-06
Use the following procedures to reset the MiniMax environment to factory
defaults.
Check the environment by entering the following command. An example of
1.
the associated response is included. Note any settings, such as the IP address,
that might be required later.
>>env
cbaud=9600
autoboot=N
autorun=N
verbose=false
netaddr=10.1.2.5
netmask=255.255.255.0
gwaddr=10.1.2.254
bootfile=/flash/maxos.bz2
TZ=GMT10DST
TERM=ansi
FIPS_MODE=0
COLUMNS=80
ROWS=25
bootdevice=/flash/maxos.bz2
build=200208160004
version=4.0.0
Enter resetenv to return the device to factory settings.
2.
You are not prompted to continue. The process begins once
Note
you have types the command and pressed Enter.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Examples
D-9