Example: Saving A Configuration File; Step-Up Certificates And Server-Gated Cryptography - Cisco CSS11501S-C-K9 Configuration Manual

Chapter 4 Using the Configuration Manager

Example: Saving a Configuration File

Step-Up Certificates and Server-Gated Cryptography

Note
78-13124-06
Once you have configured your device and it is running well, you should save the
configuration to a separate file. This file can be used to restore the device in case
of a power cycle or serious error. This example demonstrates how to save the
startup-configuration to a file.
Enter Privileged mode.
1.
SCA> enable
SCA#
Save the existing configuration to be the startup-configuration.
2.
SCA# write flash
SCA#
Save the startup-configuration to a file.
3.
SCA# copy startup-configuration https://www.mycorp.com/myconfig
SCA#
Before this file is uploaded to the device, you must reload the keys and configure
the passwords on the device. Use the same key object names previously used to
reference the keys.
Cisco Secure Content Accelerator support both Netscape International Step-Up
Certificates and Microsoft Server-Gated Cryptography. Ephemeral RSA must be
enabled for the device to function properly with these certificates. Load the
certificate normally.
You must specify that your certificate work with both Microsoft and
Netscape browsers when requesting it from the CA. Otherwise, the
server cannot support both browsers.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Step-Up Certificates and Server-Gated Cryptography
4-17