Getting Help - Cisco CSS11501S-C-K9 Configuration Manual

Appendix D MiniMax Command Summary

Getting Help

78-13124-06
Help is available at any time in the MiniMax environment. Simply enter help or
? (question mark) at the MiniMax prompt. An example of the output is shown
below.
>>help
? -- show this screen
baud -- change baud rate
boot -- boot flash image
cat -- display contents of file
do -- download file via xmodem
eaddr -- set/get ethernet addresses on ports
env -- print nvram environment
help -- show this screen
hinv -- display hardware inventory
ifconfig -- configured network interfaces
ip -- change ip settings
ls -- list flash file directory...
netstat -- show open file descriptors and sockets
printenv -- print nvram environment
rdate-server -- assign rdate server
reboot -- reboot minimax...
resetenv -- reset environment to factory defaults
rm -- delete flash file
sbridge -- add an ethernet port and start the bridge
show -- show system information
version -- show versions of firmware
zap -- zap downloaded file to flash (autotype)
>>
Help for individual commands having arguments is available by partially typing
the command and pressing Enter. An example is below.
>>ip
ip what?
address -- assign an ip address
route -- assign default route
>>
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Getting Help
D-3