Server Configuration Command Set; Activate; Cert - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary

Server Configuration Command Set

activate

Usage Guidelines
Related Commands

cert

Syntax Description
Usage Guidelines
78-13124-06
Use Server Configuration commands to set up and configure logical secure servers.
Enter Server Configuration mode by using the enable command in Non-Privileged
mode, the configure command in Privileged mode, the ssl command in Configuration
mode, and the server command in SSL Configuration mode. The prompt changes to
<config-ssl-server[servername]>>
Activates the current logical secure server if enough information has been
configured.
activate
Availability: Serial, Telnet; FIPS Mode (serial only)
suspend (Server Configuration Command Set)
Sets the specified certificate for use by the server.
cert <certname | default | default-1024 | default 512>
certname
default
default-1024
default-512
Availability: Serial, Telnet; FIPS Mode (serial only)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
.
The name of the certificate.
The pre-loaded default certificate.
The pre-loaded 1024-bit default certificate.
The pre-loaded 512-bit default certificate.
Configuration Command Set
C-165