Keepalive Maxfailure; Localport - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set

keepalive maxfailure

Syntax Description
Usage Guidelines
Related Commands

localport

Syntax Description
Usage Guidelines
Caution
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-128
Specifies the number of failed keepalive responses before the virtual backend
server is set to "suspended".
keepalive maxfailure <count>
count
Availability: Serial, Telnet; FIPS Mode (serial only)
keepalive enable (Backend Server Configuration Command Set)
keepalive frequency (Backend Server Configuration Command Set)
Specifies the TCP service port through which non-secure connections are
received.
localport <port|default>
port
default
Availability: Serial, Telnet; FIPS Mode (serial only)
Traffic sent on this TCP service port is not secured by SSL during
transmission to the server. It must be secured by another means.
The number of failed keepalive message responses;
the range is 1 to 10 (inclusive); the default is 3
The used to transfer non-secure traffic.
Sets the port specification to 80.
Appendix C Command Summary
78-13124-06