Keepalive Enable; Keepalive Frequency - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Usage Guidelines

keepalive enable

Usage Guidelines
Related Commands

keepalive frequency

Syntax Description
Usage Guidelines
Related Commands
78-13124-06
Availability: Serial, Telnet; FIPS Mode (serial only)
Using the no form of the command clears the IP address for the backend server.
Allows keepalive messages to be sent to the hardware server corresponding to the
current virtual backend server.
keepalive enable
no keepalive enable
Availability: Serial, Telnet; FIPS Mode (serial only)
Using the no form of the command disables sending of keepalive messages.
keepalive frequency (Backend Server Configuration Command Set)
keepalive maxfailure (Backend Server Configuration Command Set)
Specifies the interval between keepalive messages.
keepalive frequency <seconds>
seconds
Availability: Serial, Telnet; FIPS Mode (serial only)
keepalive enable (Backend Server Configuration Command Set)
keepalive maxfailure (Backend Server Configuration Command Set)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The number of seconds between keepalive messages;
the range is 1 to 255 seconds (inclusive); the default is
5 seconds
Configuration Command Set
C-127