Snmp Location - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Related Commands

snmp location

Syntax Description
Usage Guidelines
Related Commands
78-13124-06
show snmp (Non-Privileged Command Set)
snmp access-list (Configuration Command Set)
snmp contact (Configuration Command Set)
snmp default community (Configuration Command Set)
snmp location (Configuration Command Set)
snmp trap-host (Configuration Command Set)
snmp trap-type enterprise (Configuration Command Set)
snmp trap-type generic (Configuration Command Set)
Assigns location information for the SNMP subsystem.
snmp location <locInfo>
no snmp location
locInfo
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to clear the location information.
no snmp (Configuration Command Set)
show snmp (Non-Privileged Command Set)
snmp access-list (Configuration Command Set)
snmp contact (Configuration Command Set)
snmp default community (Configuration Command Set)
snmp enable (Configuration Command Set)
snmp trap-host (Configuration Command Set)
snmp trap-type enterprise (Configuration Command Set)
snmp trap-type generic (Configuration Command Set)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The string containing the location information. This
information is entered within quotes.
Configuration Command Set
C-99