Snmp Access-List - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set

snmp access-list

Syntax Description
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-96
snmp trap-host (Configuration Command Set)
snmp trap-type enterprise (Configuration Command Set)
snmp trap-type generic (Configuration Command Set)
Assigns an existing access list to be used with the SNMP subsystem.
snmp access-list <id>
no snmp access-list <id>
id
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to remove the specified access list. The access
list still exists but is no longer used by the SNMP subsystem.
access-list (Configuration Command Set)
no snmp (Configuration Command Set)
show access-list (Non-Privileged Command Set)
show snmp (Non-Privileged Command Set)
snmp contact (Configuration Command Set)
snmp default community (Configuration Command Set)
snmp enable (Configuration Command Set)
snmp location (Configuration Command Set)
snmp trap-host (Configuration Command Set)
snmp trap-type enterprise (Configuration Command Set)
snmp trap-type generic (Configuration Command Set)
telnet access-list (Configuration Command Set)
web-mgmt access-list (Configuration Command Set)
The identifier corresponding to an access list
configured on the current device.
Appendix C Command Summary
78-13124-06