Certgroup - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary

certgroup

Syntax Description
Usage Guidelines
Examples
Related Commands
78-13124-06
Creates and/or configures the specified certificate group and enters Certificate
Group Configuration mode for the certificate group.
certgroup <certgroupname> [create]
no certgroup <certgroupname>
certgroupname
create
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to remove the specified certificate group. You
cannot remove a certificate group referenced by a server. A device can have up to
63 (SCA) or 4095 (SCA2) certificate groups. Certificate group names can consist
of Arabic numerals and upper- and lowercase alphabetic, underscore (_), hyphen
(-), and period (.) characters. Certificate group names must begin with an
alphabetic character or underscore and have a limit of 15 characters.
The following example creates a certificate object named myCertGroup and enters
Certificate Group Configuration mode for certificate group myCertGroup.
cert myCertGroup create
show ssl certgroup (Top Level Command Set)
See the section "Certificate Group Configuration Command Set".
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The name of the certificate group.
Creates a new certificate group named certgroupname
and enters Certificate Group Configuration mode for
that object.
Configuration Command Set
C-115