Appendix C
Command Summary
Related Commands
log-url
Syntax Description
Usage Guidelines
remoteport
Syntax Description
78-13124-06
remoteport (Backend Server Configuration Command Set)
Specifies a host for logging of URL requests.
log-url <ipaddr> [port <portid>] [facility <facilityid>]
no log-url <ipaddr>
ipaddr
port
portid
facility
facilityid
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to remove the specified log-url server from the
list. Only one log-url server can be configured.
Specifies the TCP service port through which redirected secure connections are
sent.
remoteport <port|default>
port
default
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The IP address of the device to receive log-url
messages.
Keyword indicating that a specific TCP port should be
used for communications.
The TCP port to be used.
Keyword indicating a specific facility should be used.
A numeral (from 0 to 7, inclusive) specifying the
facility to be used.
The used to transfer secure traffic.
Sets the port specification to 443.
Configuration Command Set
C-129