Show Ssl Session-Stats - Cisco CSS11501S-C-K9 Configuration Manual

Top Level Command Set

show ssl session-stats

Syntax Description
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-56
show ssl errors (Non-Privileged Command Set)
show ssl key (Non-Privileged Command Set)
show ssl secpolicy (Non-Privileged Command Set)
show ssl statistics (Non-Privileged Command Set)
ssl (Configuration Command Set)
See the sections "SSL Configuration Command Set" and "Server Configuration
Command Set".
Displays SSL session statistics summed over a single or all secure logical servers
on the device.
show ssl session-stats [server <servername>] [continuous] [interval
<value>]
server
servername
continuous
interval
value
Availability: Serial, Telnet; FIPS Mode (serial only)
(This command must be entered on a single line.) Use the continuous keyword to
update the statistics every second. Use the interval keyword to specify an interval
for display updates. Press any key to stop displaying information. Table C-18
below presents a description of the items in the output.
Identifies a single server for statistics.
Specifies a single server name for statistics display.
Displays statistics continuously.
Specifies an interval for display updates.
The interval in seconds.
Appendix C Command Summary
78-13124-06