Env - Cisco CSS11501S-C-K9 Configuration Manual

Appendix D MiniMax Command Summary
Usage Guidelines
Examples

env

78-13124-06
b
threeoctets
B
sixoctets
(This command must be entered on one line.)
The following example demonstrates setting the "Network" interface to 100Mbit
and full duplex.
>> eaddr -f p 0 s 100
The example below shows how to set the last three octets of the MAC addresses
of both interfaces, beginning with the address specified.
>> eaddr -ib 010000
Prints the nvram environment to the console.
env
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Option indicating the specified Ethernet interface(s)
should be configured using the subsequent argument
as the last three octets of the MAC address. When the
-i option is used to indicate both interfaces are to be
configured, the specified argument is used as the
address for the "Network" port and the argument is
incremented for the "Server" interface address.
The last three octets of the address. This argument
should be entered as hex values.
Option indicating the specified Ethernet interface(s)
should be configured using the subsequent argument
as the octets of the MAC address. When the -i option
is used to indicate both interfaces are to be configured,
the specified argument is used as the address for the
"Network" port and the argument is incremented for
the "Server" interface address.
The octets of the address. This argument should be
entered as hex values.
Command Set
D-13