Table of Contents
Advertisement
Preparing for Router Installation
This section provides preinstallation information such as recommendations and requirements to review prior
to installing your router.
•
•
•
•
•
•
•
Safety Recommendations
Follow these guidelines to ensure general safety:
• Keep the chassis area clear and dust-free during and after installation.
• Keep tools and chassis components away from walk areas.
• Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up your
• Wear safety glasses when working under conditions that might be hazardous to your eyes.
• Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Safety with Electricity
Follow these guidelines when working on equipment powered by electricity:
• Locate the emergency power-off switch in the room in which you are working. If an electrical accident
• Disconnect all power before doing the following:
• Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension
• Do not work alone if hazardous conditions exist.
Safety Recommendations, on page 15
General Site Requirements, on page 16
Rack Requirements, on page 17
Router Environmental Requirements, on page 17
Power Guidelines and Requirements, on page 17
Network Cabling Specifications, on page 18
sleeves.
occurs, you can quickly turn off the power.
• Installing or removing a chassis
• Working near power supplies
cables, frayed power cords, and missing safety grounds.
C H A P T E R
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
2
15
Advertisement
Table of Contents
