Figure 214. PCIe riser 2 cable routing
a.
If applicable, connect the blue signal cable to PCIe 2 and PCIe 3 connectors on the system
board.
b.
Connect the power cable to Riser 2 power connector (R RISER PWR) on the power distribution
board.
c.
Connect the silver signal cable to PCIe 4 and PCIe 5 connectors on the system board.
d.
If applicable, secure the blue signal cable in cable clip
e.
Route the silver signal cable through the cable wall; then, secure the cable in cable clip
Press the cable down toward the system board to avoid interfering the retaining clips of
memory module slots.
GPU power cable routing
Follow the instructions in this section to learn how to do cable routing for the GPU power cables.
This section provides cable routing instruction for GPU power cable, 450mm.
.
A
.
Chapter 6
Internal cable routing
.
C
239