Table of Contents
Advertisement
Step 3.
If applicable, disengage all the GPU power cables from the cable guide of the processor air baffle.
Figure 118. GPU power cables on processor air baffle
Step 4.
Loosen the two captive screws; then, lift the riser assembly from the chassis.
Figure 119. Lifting PCIe riser 2
Step 5.
Disconnect all the cables from the PCIe adapters; then, place PCIe riser 2 on the front drive cage.
Note: Do not disconnect the cables from the riser card.
.
Chapter 5
Hardware replacement procedures
145
Advertisement
Table of Contents
Troubleshooting
