Table of Contents
Advertisement
Figure 45. Replacing the riser 1 filler
Step 2.
If necessary, remove or install the riser 2 filler.
a.
To remove the filler, loosen the screw that secures the filler; then, grasp and lift the filler from
the air baffle.
b.
To install the filler, align the filler with the edge of the air baffle, and lower the filler down until
the guide pins on the bottom of the filler are seated in place; then, fasten one screw to secure
the filler.
.
Chapter 5
Hardware replacement procedures
71
Advertisement
Table of Contents
Troubleshooting
