Table of Contents
Advertisement
Figure 135. Installing a low-profile filler
Step 5.
Install the side support bracket.
a.
Lower the bracket down to the riser assembly; then, push the bracket toward the riser
assembly until it is seated in place.
b.
Fasten one screw to secure the bracket.
Note: Make sure that the two tabs on the side of side support bracket are seated under the
edge of riser cage.
Figure 136. Installing the side support bracket
After this task is completed
Complete the parts replacement. See
Install the PCIe riser assembly
Follow the instructions in this section to install the PCIe riser assembly.
S002
"Complete the parts replacement" on page
225.
.
Chapter 5
Hardware replacement procedures
155
Advertisement
Table of Contents
Troubleshooting
