Lenovo ThinkEdge SE455 V3 User Manual page 258

4. Install the processor air baffle. See
5. Proceed to connect the front BP signal cable to the RAID adapter on PCIe riser assembly, and install the
assembly. See "Install the PCIe riser assembly" on page
6. Proceed to "Complete the BP cable routing" on page
System board to front NVMe + RAID to internal SATA BP
1. Connect the front BP signal cable to the connectors on the system board in the following order:
a. PCIe 11
b. PCIe 10
Figure 227. Front BP signal cable
2. Route the front BP signal cable through the cable wall; then, secure the cable into cable clip
Note: Route one cable branch through the cable wall first; then, route the other through the cable wall.
3. Secure the internal BP signal cable in cable clip
250 ThinkEdge SE455 V3 User Guide
"Install the processor air baffle" on page
155.
251.
.
C
73.
and
A
.
D