Procedure
Step 1.
Make preparation for this task.
a.
Remove the top cover. See
b.
Remove all the front drives. See
Step 2.
Pinch the blue touch points on the backplane bracket as shown; then, lift the backplane to remove
it.
Figure 68. Removing the front drive backplane
Step 3.
Disconnect the cables from the drive backplane.
Step 4.
If necessary, loosen the two screws to separate the drive backplane from the backplane bracket.
100
ThinkEdge SE455 V3 User Guide
"Remove the top cover" on page
"Remove a front hot-swap drive" on page
223.
97.