Lenovo ThinkEdge SE455 V3 User Manual page 253

Figure 221. Internal BP signal cable
2. Secure the internal BP signal cable into cable clip
3. Connect the front BP signal cable to the connectors on the system board in the following order:
a. PCIe 11
b. PCIe 10
Figure 222. Front BP signal cable
4. Route the front BP signal cable through the cable wall; then, secure the cable into cable clip
5. Install the processor air baffle. See
6. Install the PCIe riser assemblies. See
7. Proceed to "Complete the BP cable routing" on page
.
A
"Install the processor air baffle" on page
"Install the PCIe riser assembly" on page
251.
and
A
73.
155.
.
Chapter 6 Internal cable routing
.
D
245