Table of Contents
Advertisement
Adjust the retainer on the M.2 backplane
Follow instructions in this section to adjust the retainer on the M.2 backplane.
About this task
Attention:
• Read
"Installation Guidelines" on page 39
work safely.
Procedure
Step 1.
Locate the retainer to be adjusted.
Step 2.
Select the correct keyhole that can accommodate the particular size of the M.2 drive to be
installed.
Step 3.
Adjust the M.2 retainer.
a.
Press and hold both sides of the retainer.
b.
Move the retainer forward until it is in the large opening of the keyhole.
c.
Take the retainer out of the keyhole.
d.
Insert the retainer into the correct keyhole.
e.
Press and hold both sides of the retainer.
f.
Slide the retainer toward the small opening of the keyhole until it is seated in place.
128
ThinkEdge SE455 V3 User Guide
and
"Safety inspection checklist" on page 40
to ensure that you
Advertisement
Table of Contents
Troubleshooting
