Lenovo ThinkEdge SE455 V3 User Manual page 63

Figure 24. EIA bracket maximal depth for security bezel: four screws
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the EIA brackets
Follow instructions in this section to install the EIA brackets.
About this task
Attention:
• Read "Installation Guidelines" on page 39
work safely.
Note: Depending on the configuration, the EIA brackets might look slightly different from the illustration in
this section.
Procedure
Step 1. Secure each of the EIA brackets to the chassis with four or six screws. Make sure to align the two
brackets to the same numbers (1 to 6) or the "MAX" mark on both sides of the chassis.
Note: The EIA brackets are designed as adjustable. To ensure sufficient space for security bezel or
the external cables at front of the server, adjust the depth of EIA brackets according to the
operation environment.
and "Safety inspection checklist" on page 40
Chapter 5
to ensure that you
.
Hardware replacement procedures 55