Lenovo ThinkEdge SE455 V3 User Manual page 227

21. If the security LED of the server is blinking, activate or unlock the system. See
system" on page 255.
22. Power on the server and any peripheral devices. See
23. Reconfigure the system and reset the system date and time.
24. Update the vital product data (VPD). See
Machine type number and serial number can be found on the ID label, see
access the Lenovo XClarity Controller" on page
25. If SED AK has been enabled on this server, recover the SED AK. See
Authentication Key (SED AK) " on page
26. If hiding TPM or updating TPM firmware is needed, see
the TPM firmware" on page
27. Optionally, enable UEFI Secure Boot. See
Update the Vital Product Data (VPD)
Use this topic to update the Vital Product Data (VPD).
• (Required) Machine type
• (Required) Serial number
• (Optional) Asset tag
• (Optional) UUID
Recommended tools:
• Lenovo XClarity Provisioning Manager
• Lenovo XClarity Essentials OneCLI commands
Using Lenovo XClarity Provisioning Manager
Steps:
1. Start the server and press the key according to the on-screen instructions. The Lenovo XClarity
Provisioning Manager interface is displayed by default.
2. Choose System Summary. The "System Summary" tab page is displayed.
3. Click Update VPD, then, follow on-screen instructions to update the VPD.
Using Lenovo XClarity Essentials OneCLI commands
• Updating machine type
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
• Updating serial number
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
• Updating system model
onecli config set SYSTEM_PROD_DATA.SysInfoProdIdentifier <system model> [access_method]
onecli config set SYSTEM_PROD_DATA.SysInfoProdIdentifierEx <system model> --override [access_method]
• Updating asset tag
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
• Updating UUID
onecli config createuuid SYSTEM_PROD_DATA.SysInfoUUID [access_method]
"Update the Vital Product Data (VPD)" on page
35.
211.
221.
"Enable UEFI Secure Boot" on page
"Power on the server" on page
"Identify the server and
"Manage the Self Encryption Drive
"Hide/observe TPM" on page 220
.
Chapter 5 Hardware replacement procedures
"Activate or unlock the
48.
219.
or "Update
222.
219