Lenovo ThinkEdge SE455 V3 User Manual page 249

This section provides cable routing instruction for RAID flash power module extension cable (supercap
cable), 330mm.
Note: Install the RAID flash power module when ThinkSystem RAID 940-8i 4GB Flash PCIe Gen4 12Gb
Adapter is installed.
Figure 216. RAID adapter on PCIe riser 1
Figure 217. RAID adapter on PCIe riser 2
Complete the following procedure to route the cables properly.
Procedure
Step 1. Connect the extension cable to
Step 2. Secure the extension cable in cable clip
Step 3. Proceed to connect the cable to the 940-9i RAID adapter on PCIe riser assembly, and install the
assembly. See
• 940-8i RAID adapter on PCIe riser 1
1a
• 940-8i RAID adapter on PCIe riser 2
1b
RAID flash power module.
1
"Install the PCIe riser assembly" on page
.
C
155.
.
Chapter 6 Internal cable routing 241