Complete The Parts Replacement - Lenovo ThinkEdge SE455 V3 User Manual

• Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside the server.
• Make sure that all internal cables are correctly routed. See
Procedure
Step 1. Install the top cover.
a. Align the top cover with the guiding slots on both sides of the chassis; then, slide it
backwards until it is firmly seated.
b. Lock the top cover with the key, and store the key to the key holder on the top cover for
future use.
Figure 198. Installing top cover
After this task is completed
Complete the parts replacement. See

Complete the parts replacement

Go through the checklist to complete parts replacement
To complete the parts replacement, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your server.
2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information
for each component.
Chapter 6 "Internal cable routing" on page
"Complete the parts replacement" on page 225.
.
Chapter 5 Hardware replacement procedures
227.
225