Lenovo ThinkEdge SE455 V3 User Manual page 110

Step 1. If necessary, assemble the backplane with the backplane bracket.
a. Align the notch of the backplane with the nub of the bracket; then, insert the backplane to the
bracket until the backplane is seated in place.
b. Secure the backplane with two screws.
Figure 70. Securing the backplane to the backplane bracket
Step 2. Connect the power and signal cables to the drive backplane.
Step 3. Pinch the blue touch points on the backplane bracket as shown; then, press the backplane into the
slot until it clicks into place.
Figure 71. Installing the front drive backplane
102 ThinkEdge SE455 V3 User Guide