Lenovo ThinkEdge SE455 V3 User Manual page 256

Figure 225. Front BP signal cable
2. Route the front BP signal cable through the cable wall; then, secure the cable into cable clip
3. Install the processor air baffle. See
4. Install the PCIe riser assemblies. See
5. Proceed to "Complete the BP cable routing" on page
System board to front SATA BP
1. Connect the front BP signal cable to PCIe 10 connector on the system board.
2. Route the front BP signal cable through the cable wall; then, secure the cable into cable clip
248 ThinkEdge SE455 V3 User Guide
"Install the processor air baffle" on page
"Install the PCIe riser assembly" on page
251.
and
A
73.
155.
and
A
.
D
.
D