Lenovo ThinkEdge SE455 V3 User Manual page 123

a. If applicable, press the following cables down and make sure that the cables are under the
cable clip of the processor air baffle.
1. Signal cable of internal drive backplane
2. Power cable of internal drive backplane
3. The blue signal cable of PCIe riser 2
Figure 85. Internal drive backplane cable routing
b. Press the silver signal cable of PCIe riser 2 down to the space between the front drive
backplane and the internal drive cage.
Figure 86. Front drive backplane cable routing
After this task is completed
1. Reinstall the drives into the internal drive bays. See
2. Complete the parts replacement. See
"Install an internal drive" on page
"Complete the parts replacement" on page
Chapter 5
116.
225.
.
Hardware replacement procedures 115