Lenovo ThinkEdge SE455 V3 User Manual page 264

1. Connect the power cable to your ThinkEdge SE455 V3.
2. Download the ThinkShield Edge Mobile Management App from Google Play Store or Apple App Store
to your Android or iOS based smart phone (search term: "ThinkShield Edge").
3. Log-in to the ThinkShield Edge Mobile Management App using your Organization registered ID.
4. When App instructs to do so, connect USB cable with USB mobile phone charging cable to the
ThinkEdge SE455 V3.
Note: When the smart phone prompts for the USB connection purpose, choose data transfer.
5. Follow the "Activate Device" on-screen instructions to complete secure activation of the system.
6. When activated successfully, ThinkShield Edge Mobile Management App will provide "Device
Activated" screen.
Note: For the detailed steps, see ThinkShield Edge Mobile Management Application User Guide in
https://lenovopress.lenovo.com/lp1725-thinkedge-security.
• Portal automatic activation
Note: To activate the system through ThinkShield Key Vault Portal web interface for the first time, the
system should be claimed by your organization. Machine Type, Serial Number, and Activation Code are
required to claim a device. For more information of claiming the device, see
com/lp1725-thinkedge-security.
1. Connect the power cable to your ThinkEdge SE455 V3.
2. Connect the XClarity Controller Management Ethernet port to a network that has access to the
internet.
Note: Outbound TCP port 443 (HTTPS) must be open for activation to occur.
3. Log in to the ThinkShield Key Vault Portal with your Organization registered ID.
4. If the server is not claimed by your organization, claim the server. Add the device by clicking the
Claim device button in Device Manager. Enter machine type, serial number, and secure activation
code in the corresponding fields.
5. From the Device Manager, select the server you plan to activate and click activate. The status of the
server will change to Ready.
6. Server will be activated within 15 minutes and power on automatically. After successful activation, the
status of the server will change to Active on the ThinkShield Key Vault Portal.
Notes:
– If the server activation is not initiated within 2 hours after the power cable plug in, perform a disconnect
then re-connect of the power cable to your ThinkEdge SE455 V3.
– For the detailed steps, see ThinkShield Key Vault Portal Web Application User Guide in
lenovopress.lenovo.com/lp1725-thinkedge-security.
Unlock the system
Important:
• When System Lockdown Control status is XClarity Controller, if XClarity Controller is reset to defaults, the
default credentials can be used to login to XClarity Controller and unlock the system. It is important to use
security controls such as an UEFI PAP to prevent unauthorized users from executing an XClarity
Controller reset to defaults. For the highest level of security, it is recommended to set System Lockdown
Control to ThinkShield Portal. See
Complete the following steps to unlock the system in Lenovo XClarity Controller web interface
256 ThinkEdge SE455 V3 User Guide
"System Lockdown Mode Control" on page 255
https://lenovopress.lenovo.
https://
for the details.