Polar Speed Sensor Bluetooth® Smart; Pair A Speed Sensor With V800; Measuring Wheel Size - Polar Electro V800 Owner's Manual

POLAR SPEED SENSOR BLUETOOTH® SMART

PAIR A SPEED SENSOR WITH V800

Make sure the speed sensor has been correctly installed. For more information on installing the speed sensor
refer to the user manual of the speed sensor.
There are two ways to pair a speed sensor with your V800:
1. Press START in time view to enter pre-training mode.
2. V800 starts searching for your speed sensor. Rotate the wheel a few times to activate the sensor. The
flashing red light in the sensor indicates that the sensor is activated.
3. The device ID Pair Polar SPD xxxxxxxx
4. Pairing completed
5. Sensor linked to:
6. Set wheel size
or
1. Go to General Settings > Pair and sync > Pair other device
2. V800 starts searching for the speed sensor. Rotate the wheel a few times to activate the sensor. The
flashing red light in the sensor indicates that the sensor is activated.
3. Once the speed sensor is found,
4. Press START,
5. Pairing completed
6. Sensor linked to:
7. Set wheel size

MEASURING WHEEL SIZE

Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining the
wheel size of your bike:
Method 1
Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in millimeters in
the right column of the chart.
ETRTO
25-559
23-571
is displayed when the pairing is complete.
is displayed. Choose
is displayed. Set the size and press START.
Polar SPD xxxxxxxx
Pairing is displayed.
is displayed when the pairing is complete.
is displayed. Choose
is displayed. Set the size and press START.
Wheel size diameter (inches)
26 x 1.0
650 x 23C
is displayed. Choose Yes.
Bike 1 or Bike 2. Confirm with START.
is displayed.
Bike 1 or Bike 2. Confirm with START.
92
and press START.
Wheel size setting (mm)
1884
1909