Ftp Function - Mitsubishi Electric MELSEC Q Series User Manual

12.1.2

FTP function

The server function of FTP (File Transfer Protocol), a protocol for file transfer to/from destination devices, is supported.
This allows for direct access to file(s) in the C Controller module from a destination device with the FTP client function.
Operations of file(s) in the C Controller module from a destination device with the FTP client function are allowed.
• File read-out (download) from C Controller module
A function to store C Controller module files on the destination device(s).
• File writing (upload) from C Controller module
A function to register files stored in the destination device(s) to the C Controller module.
• Showing directories and files in the C Controller module
A function to view files registered in the C Controller module on the destination device(s).
(1) Setting method
A user name and password is required to use the FTP function.
Before using the FTP function, set the user name, password, and access authority in the C Controller module.
By setting the user information (user name, password and access authority), FTP users can be restricted. For
details, refer to the following.
Page 177, Section 11.8.1
CHAPTER 12 FUNCTIONS ACCESSED VIA ETHERNET PORTS
For "-LS", consult with the
partner (operating system vendor).
FTP
Development
By FTP
environment
File operation!
(Personal computer)
Q24DHC-V Q24DHC-VG Q24DHC-LS
C Controller module
Q26DHC-LS Q12DC-V
12
197