Table of Contents
Advertisement
Instructions for Use
Installation
Preparation for Installation
The following items are included in the shipment:
Agilent Technologies leak detector configured and completely assembled as
ordered
All necessary power cords, as ordered
Any optional equipment ordered.
Unpacking
Unpacking the Leak Detector: Always work in a team of at least two people.
WARNING
Wear personal protective equipment (PPE), including gloves, boots, and a
weight belt to avoid injury.
Remove from Skid
1
Take the entire skid and box to an open area. Remove the shipping straps and
pull the cardboard box straight up, over the leak detector. Save the box and the
skid in case you need to do a return shipment (see following figure).
Figure 1 Remove from Skid
26
ON
Agilent Helium Leak Detector User Manual
Advertisement
Table of Contents
