Technical Information
Rear Panel
The rear panel of the leak detector with the wireless remote control option is shown
in the following figure.
Figure 21 Home Screen
1
Serial Connector
2
Cover Plate or I/O PCB
Agilent Helium Leak Detector User Manual
A 9-pin male D-type connector to interface with an
external PC via RS-232 type communications protocol
for system diagnostic or control. A detailed summary
of information related to serial communication is
provided in Section A "Communications Protocol".
Access to expansion slot. This is not used when an
optional I/O PCB is installed. A rear panel of
the optional I/O PCB is shown in Figure 22.
57