Table of Contents
Advertisement
Installation
Refer to the following information when using the detector. Do not drop the
detector or subject it to excessive mechanical shock.
Initial Inspection
1. Check the shipping container and packaging material for damage.
2. Check that the shipment is complete.
3. Check connector, cable, and detector body for mechanical damage.
4. Check the detector electrically:
Either perform the operator's check in Chapter 3, \Operation," or make a
measurement in Chapter 4, \Performance ests."
If any of the following conditions exist, notify your nearest Agilent oce:
Incomplete shipment.
Mechanical damage or defect.
Failed electrical test.
If you nd damage or signs of stress to the shipping container or the cushioning
material, keep them for the carrier's inspection. Agilent does not wait for a
claim settlement before arranging for repair or replacement.
Ag lent 85025A/B/D/E
2
Installat on
2-1
Advertisement
Table of Contents
