Technical Information
Maintenance Screen
Maintenance Menu
The Maintenance Menu allows you to view or change the settings/parameters of
the leak detector, including
General
•
Manual Tuning
•
Valve Control
•
Pump
•
Gauge
•
System Defaults
•
This Maintenance menu (General) allows you to view and input the value and
parameters of the installed internal calibrated leak. A Software Update utility is also
now available.
Figure 66 Maintenance General
122
Internal Calibrated Leak
Spectrometer tuning parameters
Valve status
Primary/Roughing Pump configuration
Test Port TC calibration
Reset Turbo & Filament hours
Agilent Helium Leak Detector User Manual