Table of Contents
Advertisement
Instructions for Use
Equipment, General
Environment of intended use:
Indoors use in an industrial and laboratory installation only.
Altitude up to 2000m
POLLUTION DEGREE 2, Material group III
Operating Temperature: +12 °C to +40 °C, Relative Humidity (RH) up to 90%
max., non-condensing.
Storage ambient conditions: RH from 0% to 95%, non-condensing, temperature:
-20°C to +60°C.
• Do not use in presence of flammable or explosive gas.
WARNING
• Do not attempt to disassemble or modify the equipment. Such action could
lead to electric shock or injury. Agilent's authorized technician will do any
repair work.
• If there is smoke or unusual smell or noise, stop the using the equipment
immediately, and contact the Agilent Service Cent.
The leak detector is not designed for use with hazardous gases.
WARNING
Verify that the system to be tested has been purged of all hazardous gases
prior to using the leak detector. When testing a system that contained
hazardous gases, connect the exhaust of the leak detector to a scrubbed or
toxic containment exhaust. Exposure to hazardous gases could result in
serious injury or death.
WARNING
Equipment tightness is guaranteed for normal operating conditions when the
equipment leaves the factory. It is the user's responsibility to maintain the
level of tightness, particularly when pumping dangerous products.
Agilent Helium Leak Detector User Manual
17
Advertisement
Table of Contents
