Table of Contents
Advertisement
Technical Information
Technical Specifications
Table 6
Leak Detector Series Specifications
Specifications
Pumps
Fore Pump Type
Pump Speed, l/min, 60/50 Hz
Minimum Detectable Leak,
atm-cc/sec
Internal Pump Version
Turbo Molecular Pump
Leak Units
Peak Pumping Speed
Helium Response Time
Test Port
Recommended Operating Ambient Conditions
Installation
Operating Temperature
Humidity
Heat Load
Air Pressure
Maximum system vibration
Storage Ambient Conditions
Power Requirements
50
Agilent Technologies Helium Mass Spectrometer Versions
Rotary Vane
DS40M
DS-302
36/30
285/237
Navigator™ Turbo molecular pump specifically designed for leak detection
atm-cc/sec, mbar-l/sec, torr-l/sec, Pa-m
• Contra w/IDP15 - 3.8 l/sec for N2 and He at 60 Hz
• Contra w/TS620 - 6.5 l/sec for N2 and He at 60Hz
• Contra w/ DS40M – 0.5 l/sec for N2 and He at 60Hz in Contra (.42 l/sec @ 50Hz).
• Contra w/ DS302 – 3.0 liters/sec for N2 and He at 60Hz (2.5 l/sec @ 50 Hz).
• Contra w/ IDP-3 - 1.1 l/sec (60 Hz), 1.0 l/sec (50 Hz)
• Midstage – 1.8 liters/sec for He at 50 or 60 Hz.
0.5 second, within 66% of peak reading within the given time. Per AVS 2.1.
1/8"
NW-25; A 1
(28 mm) ID Compression Port is available as an accessory.
Indoor use only. Altitude up to 2000 m (6,400'), Material Group III, POLLUTION DEGREE 2
according to EN61010-1 Standard, Class 1
System: +12° C to +45° C (wet and dry pumps); Fore pump limited on the low ends and
turbo pump limited on the high ends.
Maximum relative humidity (HR) 90%
1000 W (+/-5%)
563 Torr (75 kPa) to 795 Torr (106 kPa)
3 G's (Turbo Limit)
Relative humidity: 0% to 95%, non-condensing. Temperature:
-20 °C (-4 °F) to +60 °C (140 °F)
Input Power
• 100 VAC, 50 Hz, 20 A
• 115 VAC, 60 Hz, 20 A or
• 230 VAC, 50/60 Hz, 12 A
Max. Branch Circuit Breaker: 20A with motor-rated time delay.
Dry Scroll
TS-620
IDP-15
500/420
250/210
-12
5 x 10
DS40M/IDP-3
3
/sec, std. ft
Agilent Helium Leak Detector User Manual
IDP-3
60/50
3
/year
Advertisement
Table of Contents
