Table of Contents
Advertisement
Technical Information
Software Update
Contact Agilent Customer Service/Technical Support for the latest software
upgrade. The software update utility is necessary when added features and
software upgrades are needed. A USB jump drive is all that is needed. The USB port
is located in the back of the leak detector. See the following figure.
Figure 67 USB Port
1
Select the Software Update option. You are prompted to insert the USB drive
into the back of the leak detector. See the following figure.
Figure 68 Insert USB Drive
2
Inset the USB drive.
3
Select Continue. The software update takes no more than 15 seconds.
4
Power off the leak detector as instructed and power back on.
5
Verify in the System Information Menu that the correct software was installed.
Agilent Helium Leak Detector User Manual
123
Advertisement
Table of Contents
