Table of Contents
Advertisement
Technical Information
System Information
Press System Information on the Menus screen.
The System Information screen appears (see the following figure).
This screen gives details of the installed software version, spectrometer
parameters and the turbo frequency.
Figure 79 System Information
Table 14 System Information Screen Conditions
Condition
Ion Source Filament
See Section "Manual
Tuning".
Gain
Software Version and
Agilent Web site
Agilent Helium Leak Detector User Manual
Display
Filament 1 Off
Filament 1 On
Filament 2 Off
Filament 2 On
Gain (Gain Value)
Description
Filament 1 is selected and not lit.
Filament 1 is selected and lit.
Filament 2 is selected and not lit.
Filament 2 is selected and lit.
Displays the gain that applied to the leak
rate. The actual helium signal is multiplied
by the gain value to read the correct,
calibrated leak rate.
Shows the software version of the CPU
board.
137
Advertisement
Table of Contents
