Table of Contents
Advertisement
Technical Information
7
Configure the following settings:
•
•
•
•
•
8
Click OK.
9
Select Properties from the File menu. The Properties window appears.
10 Configure the following settings on the Connect To tab:
•
•
11 Ensure that the Settings tab is configured as follows:
•
•
•
•
•
12 Click ASCII Set-Up. The ASCII Set-Up dialog box appears.
13 Ensure that the settings are as follows:
•
•
•
14 Type some simple commands:
•
•
•
Agilent Helium Leak Detector User Manual
Bits per second (baud rate) – 9600
Data bits: – 8
Parity: – None
Stop bits: – 1
Flow Control: – None
Connect using – Verify the COM port is correct.
Click Configure and verify the port settings are correct.
Terminal keys radio button selected.
Ctrl+H radio button selected.
Auto detect selected from the Emulation pull-down list.
ANSI entered in the Telnet terminal ID.
500 set in the Background buffer lines field.
Line delay – 0 milliseconds
Character delay – 0 milliseconds
ASCII Receiving – Wrap lines that exceed terminal width
The cursor begins blinking.
?LEAK
?ALL
?SETUP
145
Advertisement
Table of Contents
