Protective Equipment - Agilent Technologies Helium User Manual

Leak detector
Table of Contents

Advertisement

Instructions for Use
To avoid injury, wait until the turbo pump is completely stopped before
WARNING
disconnecting it from the vacuum system.
Check the oil level often. Do not allow oil-based mechanical pumps to run
when the oil level is below the LOW mark.
Damage to pumps can occur if operated with no oil, if the oil level is too high
or if the oil has become discolored.

Protective equipment

The protective equipment of the operators who are executing the maintenance of
the Leak Detector must always be adequate for the type of operation being
executed. Furthermore, it must comply with the safety requirements of the
legislation in force in the country in which the machine is used.
In general, the operator must wear accident-prevention shoes while handling the
Helium Leak Detector and during installation.
Danger to health by hazardous substances during maintenance or
WARNING
installation.
• Depending on the process peculiarity, vacuum pumps, components or
operating fluids can be contaminated by toxic, reactive or radioactive
substances.
• Wear adequate protective equipment during maintenance and repairs or in
case of reinstallation.
Agilent Helium Leak Detector User Manual
23

Advertisement

Table of Contents
loading

Table of Contents