Table of Contents
Advertisement
Technical Information
3
Power Entry Module
4
Fore Pump Power
Connection
5
Analog Output
6
Chassis (Earth) Terminal
7
Product Label
8
USB Port
9
Exhaust Cover
10 Oil Level Cover
11 Oil Drain Cover
12 Nitrogen Vent Port
13 Wireless Label
58
Provides supply power, overcurrent and EMI
protection for the leak detector.
The Power Entry Module consists of:
Power Input Connector - An IEC/EN60320/C20
standard, three-prong grounded Inlet connector.
Power Switch (I/O) - A 20A rocker type Power
Switch/Thermal Circuit Breaker.
20 A EMC line filter.
An IEC/EN60320/C19 standard, three-prong grounded
outlet connector.
DB9F connector for the analog output voltage. Pin #1
is signal (positive) and Pin #2 is return (negative).
Provided for additional connection of the leak detector
to the building grounding system to improve ESD
protection.
A product label with part number, serial number
and rating information.
A standard high speed USB Port for software updates.
Exhaust opening for a G8610A model.
Oil level window for a G8610A model.
Oil drain opening for a G8610A model.
Nitrogen vent port.
A wireless info label for leak detector with an
optional Wireless Remote Control.
Agilent Helium Leak Detector User Manual
Advertisement
Table of Contents
