Table of Contents
Advertisement
Chapter 4: Configuring the Emulator
Mapping Memory
Enter the following commands to map memory for the above program.
delete all <RETURN>
0 thru 3ffh emulation ram <RETURN>
2000h thru 4fffh emulation rom <RETURN>
5000h thru 0ffffh emulation ram <RETURN>
0fff000h thru 0ffffffh target ram <RETURN>
The resulting memory mapper screen is shown below.
To exit out of the memory mapper, enter:
end <RETURN>
To characterize unmapped ranges
• Use the default softkey to characterize unmapped ranges.
The default softkey in the memory mapper allows you to characterize unmapped
memory ranges. Unmapped memory ranges are treated as target system RAM by
default. Unmapped memory ranges cannot be characterized as emulation memory.
Examples
To characterize unmapped ranges as target RAM:
default target ram <RETURN>
To characterize unmapped ranges as guarded memory:
default guarded <RETURN>
123
Advertisement
Table of Contents
