Table of Contents
Advertisement
To run programs from an address
• Position the mouse pointer in the entry buffer and enter the address you want to run
from; then, choose Execution→Run→from ().
• Using the command line, enter the run from <address> command.
Examples
To run from address 920H:
run from 920h <RETURN>
To run programs from the transfer address
• Choose Execution→Run→from Transfer Address.
• Using the command line, enter the run from transfer_address command.
Most software development tools allow you to specify a starting or entry address
for program execution. That address is included with the absolute file's symbolic
information and is known by the interface as the transfer address.
To run programs from reset
• Choose Execution→Run→from Reset.
• Using the command line, enter the run from reset command.
When you run from reset, the emulator drives the target reset line and begins
executing from the contents of exception vector 0 (this will occur within a few
Chapter 6: Using the Emulator
Executing User Programs
195
Advertisement
Table of Contents
